[Strings.0409]
MSFT			        = "Microsoft"
SiS                     = "Silicon Integrated Systems Corp."

AutoDetect              = "Auto Negotiation"
SpeedDuplex             = "Speed & Duplex"
10Mb-Half-Duplex        = "10 Mbps Half Duplex"
10Mb-Full-Duplex        = "10 Mbps Full Duplex"
100Mb-Half-Duplex       = "100 Mbps Half Duplex"
100Mb-Full-Duplex       = "100M bps Full Duplex"
10Mb-Half-Duplex-A      = "Auto Negotiate for 10HD"
10Mb-Full-Duplex-A      = "Auto Negotiate for 10FD"
100Mb-Half-Duplex-A     = "Auto Negotiate for 100HD"
100Mb-Full-Duplex-A     = "Auto Negotiate for 100FD"
1000Mb-Full-Duplex-A    = "Auto Negotiate for 1000FD"

NumRfd                  = "Receive Buffers"
NumHwTcb                = "Transmit Buffers"

SiSGbe.DeviceDesc       = "SiS191 Ethernet Controller"
SiSGbe.DeviceDesc1      = "SiS191 1000/100/10 Ethernet Device"
SiSGbe.DeviceDesc2      = "SiS190 100/10 Ethernet Device"
SiSGbe.DeviceDesc3      = "SiS191 100/10 Ethernet Device"
SiSGbe.DeviceDesc4      = "SiS191 Ethernet Device"
SiSGbe.DeviceDesc5      = "SiS Ethernet Controller"

SiSGbe.Service.DispName = "SiS191/SiS190 Ethernet Device NDIS 6.0 Driver"
DiskDescription         = "SiS Driver Disk 1"

WakeupLink		= "Wake on Link Changed"
WakeupMagic		= "Wake on Magic Packet Received"
WakeupFrame		= "Wake on Wake Pattern Received"
bPhyLowPower		= "Power Saving"

Enabled			= "Enabled"
Disabled		= "Disabled"
Tx Enabled		= "Tx Enabled"
Rx Enabled		= "Rx Enabled"
Tx Rx Enabled		= "Tx & Rx Enabled"
Rx Tx Enabled		= "Rx & Tx Enabled"
PriorityVLANTag		= "Priority & VLAN"
PriorityVLANTag0        = "Priority & VLAN Disabled"
PriorityVLANTag1        = "Priority Enabled"
PriorityVLANTag2        = "VLAN Enabled"
PriorityVLANTag3        = "Priority & VLAN Enabled"
FlowCtrl		= "Flow Control"
BurstEn			= "Burst Transfer"

LargeSend		= "Large Send Offload (IPv4)"
Ipv4ChecksumOffload	= "IPv4 Checksum Offload"
TcpIpv4Offload		= "TCP Checksum Offload (IPv4)"
UdpIpv4Offload		= "UDP Checksum Offload (IPv4)"

NetworkAddress		= "Network Address"
JumboFrame		= "Jumbo Packet"
Thold			= "Tx Threshold"
1_4			= "1/4"
2_4			= "2/4"
3_4			= "3/4"
4_4			= "4/4"
IntAutoTune		= "Interrupt Moderation"
TxClkSelect		= "Tx Clock Select"
Internal		= "Internal Clock"
External		= "External Clock"